Quick Answer
A Gold Mining Simulator Tier 2 setup is the Mobile Wash Plant plus a Wave Table, a pump and a generator. The Mobile Wash Plant costs $36.7k. The rest of the Tier 2 setup costs under $15k.
What is a Gold Mining Simulator Tier 2 setup?
A Gold Mining Simulator Tier 2 setup replaces the hog pan with the Mobile Wash Plant. It needs both water and power to run.
The Wave Table processes the concentrate. Gold from the Wave Table goes straight into your inventory, so you skip hand panning.
The Tier 2 setup sits between the hog pan start and the fixed wash plants. After it comes the Gold Mining Simulator Tier 3 setup.
What do you buy for a Gold Mining Simulator Tier 2 setup?
Buy the whole Tier 2 setup in one trip to the shop.
| Item | Price or amount |
|---|---|
| Mobile Wash Plant | $36.7k |
| Wave Table | Just under $5k |
| Small Electric Water Pump | 1 |
| Mobile Generator | 1 |
| Power Splitter | 1, high voltage to low voltage |
| Water Splitter | 1 |
| High Voltage Power Cable | 2 |
| Low Voltage Power Cable | 2 |
| Thin Water Hose | 2 |
| Fat Water Hose | 2 |
| Water Filter | 1, in the spare parts section |
Everything else comes to just under $15k. The electric pump costs more than the diesel pump. It saves fuel runs back to town, so many players prefer it. A diesel pump from your hog pan days also works.
How much does a Gold Mining Simulator Tier 2 setup cost?
Plan for $36.7k, plus under $15k for the rest, plus a digger.
| Cost | Amount |
|---|---|
| Mobile Wash Plant | $36.7k |
| Pump, generator, hoses, cables, filter, Wave Table | Under $15k |
| Small Excavator, bought | $18k |
| Small Excavator, rented | $734 on day one |
| Small Excavator transport | About $1.5k |
| Mobile Wash Plant transport | About $3k |
The Mobile Wash Plant in the shop, the main Tier 2 purchase.
Shown at 02:00 in Krypt0nite’s video.Renting the Small Excavator keeps the start cheap. Save around $20k extra to cover a few rental days.
How do you set up the Gold Mining Simulator Tier 2 setup?
Tow it to your dig site, run water from the river, and run power from the generator.
- Hook the wash plant to your pickup truck.
- Tow it to the spot you plan to dig.
- Open the gold map and pick a spot with good drill results.
- Place the Small Electric Water Pump near the river.
- Fit the Water Filter on one end of a Fat Water Hose.
- Connect the other end to the pump intake.
- Drop the filter end into the river water.
- Run the second Fat Water Hose from the pump toward the wash plant.
- Place the Water Splitter to step the high pressure line down to Thin Water Hoses.
- Place the Mobile Generator and the Power Splitter.
- Use the Power Splitter to step high voltage down to low voltage.
- Plug Low Voltage Power Cables into the yellow power inputs.
- Start the generator and the pump.
A Fat Water Hose reaches 50 m. Place the pump close enough for the hose to reach the river.
The filter end of the Fat Water Hose goes into the river.
Shown at 06:40 in Krypt0nite’s video.Cable colors match the input colors. A yellow input takes a Low Voltage Power Cable.
Yellow inputs take a Low Voltage Power Cable.
Shown at 10:00 in Krypt0nite’s video.How do you feed the Gold Mining Simulator Tier 2 setup?
Dig paydirt with the Small Excavator and drop it into the wash plant of your Gold Mining Simulator Tier 2 setup.
Drill the claim before you choose the spot for the setup. The gold map shows where the paydirt is rich.
Dig without pushing or dropping dirt around. Dirt you move that way is rebuilt with low gold.
Why does a Gold Mining Simulator Tier 2 setup give less gold than the map?
A Tier 2 setup recovers only part of the gold in the ground. Higher tiers recover more.
| Reason | What to know |
|---|---|
| Low recovery | The Tier 2 setup recovers a low share of each square |
| Hog pan area dirt | It is richer than the main claim, to help you start |
| Moved dirt | Dirt you push or drop is rebuilt with low gold |
| Gold map accuracy | More drill holes per square make the map more accurate |
Update 1.5.1 in December 2018 raised its performance. Complaints about very low yield before it are out of date.
What comes after the Gold Mining Simulator Tier 2 setup?
Save for Tier 3 once the Gold Mining Simulator Tier 2 setup runs every day. For more detail on the machine itself, see the Gold Mining Simulator mobile wash plant setup. Compare all tiers on the Gold Mining Simulator wash plant setup page. Prices for each machine are on the Gold Mining Simulator equipment list.
FAQ
The wash plant costs $36.7k and the rest costs under $15k. Transport to your claim costs about $3k.
Yes. The Wave Table processes the concentrate and puts the gold straight into your inventory.
Rent it to start. It costs $734 on day one, while buying it costs $18k.
The Low Voltage Power Cable. Input colors match the cable colors.
Wash It All Away II unlocks when you set up a fully upgraded Tier 2 wash plant.


